SLD-10 | 600 WATT RMS 10" SHALLOW SUBWOOFER
Sale ends in
$239.99
$279.99
Unit price
per
Lease for as low as $/week
Guaranteed safe & secure checkout
1
People
are viewing this right now
Get it between
Wed Dec 25
-
Sat Dec 28
Features
- Xmax = 12mm one-way by 70% BL
- Xmech is a hard limit of 25mm one-way (being over 2x the Xmax it is a very generous limit)
- RMS Power = 600-watts
- Black Aluminum 2.5” voice coil former for superior heat dissipation
- High Temperature 4-Layer copper voice coil wire
- Stitched-On “Mini-XL” Tinsel Leads to prevent fatigue and failure
- Solid Pole with high velocity vent channels machined around the OD
- Vented, EMD Cut, Top-Plate Design
- Bolt-through motor design to ensure maximum longevity and ruggedness against mechanical failures
** This motor is bolted through the top so the bolts are not visible from the back like several other models. - Magnet ID shorting ring
Specifications
-
SLD 10"
T/S SPECS SLD 10″ D2 SLD 10″ D4 RE (Ohms) 3.65 6.85 FS (Hz) 44.907 46.817 VAS (L) 14.630 12.091 Qes 0.452 0.547 Qms 2.212 2.246 Qts 0.376 0.440 Le (mH) BL (NA) 18.247 24.492 Mms (Grams) 146.252 162.818 Cms (uM/N) 85.883 70.979 Sens (dB @ 1w/1m) 86.5 85.4 Recommended Enclosure Specs:
Sealed Enclosure 0.5 cu ft Ported Enclosure 1.0 cu ft Recommended Tuning 35Hz Recommended Port Area 15 sq in Displacement Depth 4.9" Outside Diameter 10.5″ Cut-Out 9.25″
FAQ
We always reccomend a big 3 kit for every vehicle, regardless of the system. However, if you plan on running more than 1,500 watts we reccomend a good AGM battery underhood, and then from there more power will need more electrical upgrades depending on power.
