SSA DM150.2 Amplifier - 150w x 2 Ch or 500w x 1 Ch
Introducing the all new SSA DM150.2 amplifier. An old school approach, with updated components, for the most discerning of ears. If your front stage is lacking warmth and clarity, its time to upgrade. Our first amplifier in our high-end, sound quality, Class- A/B - Demon amplifier line. The SSA DM150.2 is the elite choice for that high end active front stage, premium passive components, and especially a sound quality sub (SSA Demon). We've incorporated direct inputs for those competition installs that use an external DSP and want their amp to be a pure gain block. Stellar looks to match the design and components. Don't let your speakers or your ears down, #levelup to the all new SSA DM150.2 amplifier.
- 150 Watts RMS X 2 @ 4 Ohm
- 500 Watts RMS X 1 @ 4 Ohm
- Angled Terminals for show quality installations
- Full Complimentary low distortion Class AB design
- Tiffany Style RCA connectorsFull Complimentary low distortion Class AB design
- Butterworth Crossover Filters for premium level performance
- An extra pair of input connectors for a direct input that will bypass the crossover so the amp can act as a gain block
- The op amps featured are TI chips w/BB technology high performance audio grade IC's
- Docking Pads® to reduce vibration & extend the life the amplifier
- DC, Short Circuit, Thermal & Overload Protection, on board fusing
- Diagnostic LEDs
Specifications
OUTPUT POWER @ 14.4V input | |
RMS per channel at 4 Ohms | 150 W x 2 CH |
RMS per channel at 2 Ohms | 250 W x 2 CH |
RMS Bridged Mono at 4 Ohms | 500 W x 1 CH |
RMS Mono at 1 Ohm | N/A |
INPUT SENSITIVITY | 200mV - 6.0V |
FREQUENCY RESPONSE | 10Hz - 30KHz +/- 0.5dB |
THD | LESS THAN 0.01% |
S/N RATIO | > 103 dB |
CHANNEL SEPARATION | > 91 dB |
DAMPING FACTOR @100Hz 4 ohm | > 200 |
CROSSOVER RANGE | |
High Pass, 12dB/Octave | 80-1.2K Hz |
Low Pass, 24dB/Octave | 10Hz - 250Hz |
Subsonic | N/A |
Variable Bass Boost (0 to +12 dB bass boost at 45 Hz) | Yes |
Phase Shift (0 - 180 degrees) | No |
Fusing | 3 x 40A |
Size (L x W x H) in | 16.4 x 8.9 x 2.2 |
FAQ
We always reccomend a big 3 kit for every vehicle, regardless of the system. However, if you plan on running more than 1,500 watts we reccomend a good AGM battery underhood, and then from there more power will need more electrical upgrades depending on power.