Line | DSP Line |
Reference | DSP 1600 |
Operation Class | Class D |
Number of Channels | 01 |
Maximum power |
@ 13.8 VDC - 4 OHMS: 751W RMS @ 12.6 VDC - 1 OHM: 1600W RMS @ 12.6 VDC - 1 OHM: 1976W RMS @ 13.8 VDC - 2 OHMS: 2 OHMS: 1066W RMS @ 12.6 VDC - 4 OHMS: 620W RMS |
Digital Analog Converter (ADC) | 24-bit, 96kHz, 110dB Dynamic Range |
Digital Signal Processor (DSP) | 24 bit, 96kHz |
Input Sensitivity | 230mV (Vol = 100%) |
Signal to Noise Ratio | 87dB |
Frequency Response |
@ -1dB: 22Hz to 20kHz (-1dB) -3dB: 18Hz to 30kHz (-3dB) |
Crossover High Pass (HPF) | Full at 1kHz (-24dB / 8th) Variable |
Crossover Low Pass (LPF) | 50Hz to Full (-24dB / 8th) Variable |
Bass Boost | 0 to + 10.5dB (Parametric 40/50/60/80) |
Limiters / Anti-clipping | Selectable 30%, 20%, 10% and 1% |
Phase Selector | 0 / 180º |
Thermal Management | Smart Cooler (temperature-controlled or audio cooler with two speeds) |
Efficiency | 73% |
Input Impedance | 18K OHMS |
Protection System | Output Short / High / Low Supply Voltage / Thermal Protection |
Minimum Power Supply Voltage | 9VDC |
Maximum Power Supply Voltage | 16VDC |
Consumption at Rest | 1.0A |
Musical Maximum Consumption | @ 12.6VDC: 87A |
Maximum Sine Signal Consumption | (1KHz) @ 12.6 VDC: 174A |
Dimensions (WxHxD) | 230 x 73 x 177mm |
Weight | 2,00Kg |
Additional Information |
* Parametric, 0 to + 10.5dB in 40/50/60 / 80Hz. * Power measured at 1KHz, nominal impedance (resistive load 1, 2 and 4 OHMS). Temperature 25ºC, THD around 3%. * Due to tolerances of internal components and the manufacturing process, the technical characteristics presented here can vary around 5%. |
FAQ
We always reccomend a big 3 kit for every vehicle, regardless of the system. However, if you plan on running more than 1,500 watts we reccomend a good AGM battery underhood, and then from there more power will need more electrical upgrades depending on power.