DC AUDIO SHORTIE 10 | 10" 600 WATT RMS CAR SUBWOOFER
Lease for as low as $/week
Guaranteed safe & secure checkout
DC Audio Shortie FTW -
Got limited Mounting Depth?? DC has a answer It starts out with a single slug FEA optimized motor. A chrome top plate and T yoke. 2.5" voice coil, Glossy Black stamped Steel Frame, Side Motor Venting, push terminals and a rating suggestion of 600w RMS/1200w peak power handling.
This sub works great in sealed or ported enclosures.
Key Features
• Stitched surround and paper cone assembly
• Rubber Motor boot with DC Logo
• Polypropylene dust cover with DC logo
• Heavy duty interweaved tinsel lead wire sewn to the spider
• Cast Aluminum black frame
• FEA analyzed and optimized motor assembly - Fully CNC machined with Machined side venting
• Rubber mounting gasket
• Chrome spring loaded push terminals
• 2.5” voice coil
T/S Parameters
| Shortie Subwoofers | 10" | |
|---|---|---|
| Mounting Depth | 5" | |
| Mounting Hole Diameter | 9.3" | |
| Outside Driver Diameter | 11" | |
| VC Diameter | 2.5" | |
| Displacement | .11 ft | |
| Power Handling rms/peak | 600/1200 | |
| Ohm Options | d2/d4 | |
| Sd | 346cm² | |
| Vas | 7.17L | |
| Cms | 121.51u M/N | |
| Mms | 218.5g | |
| Fs | 45.5Hz | |
| Bl | 15.678N/A | |
| Re | 7 Ohm | |
| Le | mH | |
| Qms | 4.382 |
|
| Qes | 0.819 |
|
| Qts | 0.690 | |
| Xmax | 14mm | |
| Ref SPL @1 watt | 82db | |
| Suggest Sealed Box | .5 ft | |
| Suggested Ported Box | 1.0 ft |
FAQ
We always reccomend a big 3 kit for every vehicle, regardless of the system. However, if you plan on running more than 1,500 watts we reccomend a good AGM battery underhood, and then from there more power will need more electrical upgrades depending on power.
